4x 3.7V 6000mAh LiPo Pouch Cells — 22.14Wh Each (88.56Wh Total)
4x 3.7V 6000mAh LiPo Pouch Cells
Bare lithium polymer pouch cells. Each cell is 6000mAh / 22.14Wh at 3.7V nominal. Four cells = 24Ah in parallel or build 2S / 3S / 4S as needed.
Standard-rate consumer pouch cells — not high-C race packs and not LiFePO4 prismatics. Use them where size and weight matter.
What's included
- 4x 3.7V 6000mAh LiPo pouch cells
- Tabs already on the cells
- No BMS, no wires, no case
Per cell
- Nominal: 3.7V
- Capacity: 6000mAh (6Ah)
- Energy: 22.14Wh
- Charge: 4.2V
- Cutoff: 2.75–3.0V
- Chemistry: Li-ion polymer pouch
- Made in China
4-pack totals
- 1S4P: 3.7V 24Ah / 88.56Wh
- 2S2P: 7.4V 12Ah / 88.56Wh
- 4S1P: 14.8V 6Ah / 88.56Wh
Typical use
Power banks, lighting, portable electronics, small tools, custom 1S–4S packs. For solar / RV / high-amp car audio, use our prismatic LiFePO4 cells instead.
Charge / discharge (this class of cell)
- Charge: CC/CV to 4.2V, 0.2C–0.5C (1.2–3A per cell)
- Continuous discharge: ~1C (6A per cell) typical
Important
Bare cells. Add a PCM/BMS. Li-ion/LiPo charger only — not NiMH, lead-acid, or LiFePO4 chargers. Don’t puncture or fold the pouch. Don’t charge below 0°C. Balance any series pack. Measure each cell before you weld.