8x New In Box Headway 38120 HP 3.2V 8AH Lifepo4 - $9.37/Cell
Brand New - Low Price
These high-demand new cells are priced at our lowest possible upfront cost. To make this pricing possible, discount codes are disabled. The price shown is our final, best price
These are brand new Headway 38120 HP LiFePO4 cells, supplied in their original factory packaging (8 cells per box). Recent production dates ensure fresh stock.
Priced at just $9.37 per cell.
Key Features
High-discharge cylindrical LiFePO4 cells ideal for high-power applications such as car audio systems, custom battery packs, or any project requiring compact size with substantial power output.
Rated for 120A continuous discharge (15C) and 240A pulse discharge (30C).
Supports 80A continuous charge (10C).
Compact form factor delivers impressive performance in a small package.
Cell Specifications
Nominal Voltage: 3.2v
Chemistry: LiFePO4
Full Charge Voltage: 3.65V
Full Discharge Voltage: 2.5V
Capacity: 8Ah
Max Continuous Charge: 80A
Max Continuous Discharge: 120A
Note on Assembly: These cells use M6-1.0 terminals (M6 Bolts Included) - We recommend 8mm bolts for busbars up to 1/8" thick. For thicker busbars, select bolts approximately 1/4" longer than the busbar thickness. Avoid over-tightening — use a torque wrench set to no more than 3–4 Nm to prevent damage to the cells.
Important Safety Information: These cells are capable of delivering very high current. Proper handling is essential. Always use a compatible BMS, cell holders or insulation, appropriately sized busbars, and stay within the specified voltage and current limits. We are not responsible for damage caused by over-tightening, over-charging, over-discharging, short circuits, or improper assembly. Every cell is factory-tested and arrives in new condition.
We also offer compatible cell holders, 100A busbars, and BMS units in our accessories section.
Link to Busbars: HERE
Link to Cell Holders: HERE
Cell Specifications
Nominal Voltage: 3.2v
Chemistry: LiFeP04
Full Charge Voltage: 3.65v
Full Discharge Voltage: 2.5v
Capacity: 8Ah
Max Continuous Charge: 80A
Max Continuous Discharge: 120A
If you over tighten your bolts it could damage the cell. If you have a torque wrench set it to 3nm. Do not tighten over 4nm. We are not responsible for user error. Every cell is factory tested and in new condition. If you over charge/discharge, over torque the connections, or cause a short we will not replace the cells once they are handled and assembled into a pack. Always use a BMS, cell holders or insulation between the cells, proper size busbars to carry the current, stay within the voltage/amps of the cells, and take necessary safety precautions.