Don't get ripped off, get hooked up! Due to a high volume of orders we are experiencing 3 days longer than usual shipping times. We appreciate your patience!
Don't get ripped off, get hooked up! Due to a high volume of orders we are experiencing 3 days longer than usual shipping times. We appreciate your patience!
Cart 0
8x Panasonic 3200mah NCR18650B cells IBH9100
8x Panasonic 3200mah NCR18650B cells IBH9100
8x Panasonic 3200mah NCR18650B cells IBH9100
8x Panasonic 3200mah NCR18650B cells IBH9100
8x Panasonic 3200mah NCR18650B cells IBH9100
8x Panasonic 3200mah NCR18650B cells IBH9100
8x Panasonic 3200mah NCR18650B cells IBH9100
8x Panasonic 3200mah NCR18650B cells IBH9100
8x Panasonic 3200mah NCR18650B cells IBH9100
8x Panasonic 3200mah NCR18650B cells IBH9100
Battery Hookup

8x Panasonic 3200mah NCR18650B cells IBH9100

Regular price $9.99 $0.00 Unit price per

This listing is for a medical pack with 8x genuine Panasonic NCR18650B 3200mah cells. These cells are one of the best cells on the market and perfect for many applications. Just $1.25/cell. Medical packs tend to use gold plated connectors so for those of you that like to recover precious metals the BMS and connectors might be worth holding onto as well for some added value. These packs are set up in 8s1p configuration.

We tested hundreds of these cells and they tested consistently like new. The greatest thing about medical packs is they use the best cells and don't get cycled too many times. You can see some test results in the photos. These cells are testing around the 3200mah mark as shown in our test results in the photos. With most testing between 3050-3350mah on a Zanflare testing unit. Every cell we tested was above 90% capacity and the avergage capacity on our tests was 3271mah. Botton line is these cells will test great and you likely won't have any that test below 90%. The cells likely have only been cycled a few times.

All you need is a T6 security bit and a plastic prying tool. There is some glue and tape but the glue and tape is not as bad as most medical batteries. Yes you will likely have to use heat tape like kapton tape to cover some rips in the shrink wrap when removing the cells down to cell level. You can break this down to 8s1p form an 4s1p form without ripping any wrappers. When you break down to cell level the cell wrappers are glued a little so that is when the little rips in the wrapper tend to happen. We have had customers reuse the BMS but we don't know what the BMS specs are and we recommend using these to salvage the cells inside. It would be hard to find the connector that fits the 4 gold plated pins as shown in the photos.


Share this Product