Battery Hookup
This calculation also takes into consideration the maximum continuous amp ratings of the cells.
24x New In Case Headway 38120 HP 3.2V 8AH Lifepo4 - $10/Cell
Regular price
$240.00
THESE CELLS ARE BRAND NEW IN THE ORIGINAL CASES. YOU GET 24 IN A CASE FOR EACH ORDER AS SHOWN IN THE PHOTOS. THERE ARE 3 BOXES WITH 8 CELLS INSIDE EACH CASE. ALL THE BOXES WE OPENED HAVE PRODUCTION DATES OF 7/24/24 SO THEY SHOULD ALL BE NEAR THAT DATE RANGE.
COMES OUT TO JUST $10/CELL.
THIS IS THE MOST POPULAR CELL FOR CAR AUDIO AND PERFECT FOR ANY APPLICATION THAT REQUIRES HIGH POWER IN A SMALL SPACE. MANY CUSTOMERS MAKE THEIR OWN BUSBARS AND ACCESSORIES BUT WE DO HAVE CELL HOLDERS, BOLTS, AND 100A BUSBARS AVAILABLE AT A GREAT PRICE IF YOU NEED THEM. WE ALSO HAVE BMS UNITS AS WELL. DEPENDING ON THE THICKNESS OF YOUR BUSBARS THE LENGTH OF THE BOLTS YOU'LL NEED WILL CHANGE BUT THE BOLT SIZE YOU NEED IS A VERY COMMON SIZE M6-1.0. WE HAVE THE 8MM SIZE AVAILABLE WHICH IS GREAT FOR BUSBARS UP TO 1/8" THICK. IF YOU PLAN ON MAKING THICKER BUSBARS YOU WANT TO ORDER BOLTS THAT ARE ABOUT 1/4" LONGER THAN THE THICKNESS OF THE BUSBAR.
THESE ARE BIG CELLS WITH A CRAZY AMOUNT OF POWER. EACH CELL IS RATED UP TO 120A CONTINUOUS DISCHARGE (15C) OR 240A PULSE (30C) AND CAN BE CHARGED AT 80A CONTINUOUS (10C). YOU CAN START A CAR WITH 4 OF THESE IN SERIES. PLEASE BE CAREFUL WITH THESE AND DO YOUR RESEARCH. THIS IS A MASSIVE AMOUNT OF POWER.
Cell Specifications
Nominal Voltage:
Chemistry:
Full Charge Voltage:
Full Discharge Voltage:
Capacity:
Max Continuous Charge: A
Max Continuous Discharge: A
Calculate Your Battery Pack
If you over tighten your bolts it could damage the cell. If you have a torque wrench set it to 3nm. Do not tighten over 4nm. We are not responsible for user error. Every cell is factory tested and in new condition. If you over charge/discharge, over torque the connections, or cause a short we will not replace the cells once they are handled and assembled into a pack. Always use a BMS, cell holders or insulation between the cells, proper size busbars to carry the current, stay within the voltage/amps of the cells, and take necessary safety precautions.