24V 58.8ah 1.35kWh LIFEPO4 A123 MODULE 7s

Here are 24v Lifepo4 A123 modules. They were salvaged from low mileage Fisker vehicles so they have a lot of life left.

These particular modules the cells all have good voltage but they are slightly out of balance. You can take some time to top balance these and have a nice pack. We only have a few left.

These are 7s lifepo4 packs, the A123 pouch cells used are 3.3v nominal. This pack will work great on a 24v inverter since the bulk of the capacity is between 21v-24.5v. You will need to add a 7s LifePo4 BMS. These packs can easily push 10c discharge rate on a pulse which would be almost 600 amps. Balance connector is included. There are 10 wires. 8 for balance and 2 for the temp probe. This pack is built to last and it uses the highest quality A123 cells so you can expect these to last for a very long time.

Since these came out of vehicles some may have a little dirt/grease on them and also the sides are made of super thin layered steel and some of those layers may have slight dents and imperfections.

Each module is made of 21 20ah lifepo4 cells in 7s3p configuration. If you buy a module with 1 bad series for example, you would still get 18 good cells and 1.15kWh worth of usable cells.

We also cover the $37 hazmat fee and UN-4G packaging. We are fully certified to ship lithium batteries over 300wh which are considered fully regulated shipments.

Module Dimensions: 8.75" x 6.5" x 9.75"

Module Weight 27.13 lbs

Nominal Voltage: 23.1 (7 cells, 3.3v per cell)

Maximum Charge Voltage: 25.55 (3.65v per cell)

Maximum Discharge Voltage: 17.5 (2.5v per cell)

Recommended max charge rate: 117a (2700w) (2c)

Recommended max discharge rate: 176a (4000w) (3c)