New Xalt 75HP 3.7v 75ah Power Cells

These cells have never been used and were left over from a large battery project. They will test like new. Some very minimal markings from being stacked in the trays but all cells we tested were like new and we only have a half pallet of these so get them while they last!

The cells are rated for 3c (225a) continuous charge and 8c (600a) continuous discharge. Of course that would be with proper cooling, compression, and busbars. For installs without cooling we always recommend to stay around 0.5c charge and 1c discharge which would be 37.5a charge and 75a discharge for these cells.

Always use a BMS when using power cells like this and also make sure your connections are secure and isolated so they don't short. These are true power cells so you don't want to short them out.

These cells also have a super high cycle life (2700+). These are not your standard type of lithium ion or polymer cell. This is one of the best out there.

When companies build these into packs they usually use a thin separator between the cells. Often they will use a very thin piece of plastic sheet, some use thick tape between the cells. Chip board would work and also that poster board you can find at any arts and crafts store will work. We do see some companies not use anything between the cells but we would recommend using some kind of separator to isolate the cells from each other when building them into a pack.

A lot of our customers use rivets or a hole punch and nuts and bolts to make their connections. You have enough tab length to easily make your connections.

Fully charged is 4.2v and fully discharged is 2.8v.

Weight 3.75 lbs
Dimensions 10.5" x 10.5" x 0.5"