LG 14s 24/48v 2.2kWh Rack Mount - Chino California

You can pick up from Chino California for free or we have excellent freight rates which include residential and lift gate service. We also offer a shipping calculator to estimate your shipping costs so you know the shipping costs up front before bidding. Of course you can always set up your own shipping as well.

Note: This is a 3 day liquidation sale that ends Tuesday. We cannot combine shipping with other items because all of our other inventory is from our Pennsylvania location. Pickup address is below if you want to pick up. We will help you load your vehicle. Must be picked up by Wednesday 9/21/22. We are down to only 1 pallet of modules left so it's possible these will be sold out by end of day.

13860 Benson Ave
Unit A
Chino, CA. 91710

If you want to use these as 24v just parallel the 2 packs inside instead of series.

At this price you can't go wrong. These fit standard 17" racks. Every module is checked and balanced. 14s configuration for lithium ion is perfect for powerwalls, golf carts, forklifts, and many different DIY projects. Check out the discharge curve in the 2nd photo. These are real tests we've conducted on these and on average you can expect around 2.2-2.6 kWh out of the original 3.1kWh. The modules use 30ah LG cells in 14s2p configuration. As you can see in the 3rd photo there are actually 2x 24v 7s2p modules wired in series. You can also just remove the modules and use them in a 24v application. The series busbar connection between the modules has a 300a fuse so you know these modules can push some serious power. I would recommend to limit the continuous discharge rate to around 3c. A good rule of thumb would be 2500w per 24v module or 5000w per 48v complete module. 100a discharge rate per module is perfect. If you have a 48v golf cart you can use 2-3 of these in parallel and you'll be able to run that golf cart easily.

You will have to add your own bms but the wiring is easily accessible. Each 7s module has plenty of wire length for the balance leads to splice into your BMS wiring harness. We have 14s 30a and 100a BMS units on our site if you need them. If you are building a larger powerwall and won't be pushing these hard then a 30a bms would be nice and very inexpensive.

You can also open all the modules and take the cells out if you want. They are easy to get the cells out.

Fully Charged voltage: 58.8v (4.2v per cell)
Fully Discharge voltage: 39.2v (2.8v per cell)
Recommended max continuous discharge: 100a
Recommended max continuous charge: 50a
Weight: 85 lbs.
Dimensions: 22" deep x 17" wide x 5" tall

These are rack mountable and were removed from a rack system.