FREE SHIPPING On Orders Over $2000
FREE SHIPPING On Orders Over $2000
Cart 0
24v 48ah 1.25kWh POWER Module - 2,000 Cycles!
24v 48ah 1.25kWh POWER Module - 2,000 Cycles!
Battery Hookup

24v 48ah 1.25kWh POWER Module - 2,000 Cycles!

Regular price $400.00 $0.00 Unit price per

 

The more you buy the more you save! Freight charges stay around the same cost since a 2 pack and 8 pack all get priced as 1 pallet. These are a little heavy to ship safely by ground so we are only shipping these freight. We also offer FREE pickup from our Bensalem, PA location. We get excellent freight rates which includes lift gate and residential delivery. Shipping only available to the lower 48 states and Canada.

Each Module contains 42 SPIM08HP cells, busbars, holders, and already in 7s6p 24v configuration. This is the best value battery available in 24v/48v configuration with a 2000 cycle rating! Two of these in series makes a perfect 14s 48v battery. You even get posts to add your BMS balance leads with ring terminals. You will need a 7s BMS for 24v or if you buy 2 you will need a 14s BMS. You must fully charge each module before making your series and parallel connections. This module is built to push 500 amps continuous and can pulse over 1000 amps! This is a true power module, if you need a lot of power in a small space this is what you want. Or if you want to power a forklift, golf cart, EV, high power E-bikes, etc. Our customers are powering homes, forklifts, golf carts, RV's, etc with these modules.  We actually have 2 of these in series powering one of our forklifts. You should always use a BMS.

These were used as backup starting power for cold climate generators. Therefore these have not cycled too many times. Likely less than 1 full cycle.

Module weight is 44 lbs.
Pack Dimensions 19" x 9" x 6" (add an inch for brackets and wiring clearance)
Fully charged voltage 29.4v (4.2v per cell)
Nominal Voltage 25.9v (3.7v per cell)
Fully discharged voltage 19.6v (2.8v per cell)

The busbars are copper and depending on the temperature amperage rating you can easily push much higher than we stated earlier. The cells themselves being in 6p configuration in theory can be charged up to 720 amps and can discharge at 1200 amps. Of course we don't recommend to push any battery to their maximum levels. Also these are not your typical 300-800 cycle lithium cells, these are rated for over 2000 cycles and many of our customers have built these cells into their own modules before we were finally able to negotiate getting the entire modules with the busbars and holders.

CHECK OUT THE SPECS BELOW, THESE ARE REAL SPECS FOR THE INDIVIDUAL CELLS.

 

Material Li-ion

Typical capacity 8-9AH
Nominal Voltage 3.7V
Weight around 300g
Dimensions of cell body: 9x138X190mm
Dimensions of cell with tabs 9x138X210mm

Dimensions of cell holder:6 & 5/8th x 5 & 5/8th by 3/8th inches 

Internal Resistance ≤0.8mΩ

Max Charge Rate 120A
Recommend Continuous Discharge Rate 200A
Pulse Discharge Rate(3 seconds) 400A
Fully Charged voltage 4.2V
Discharge cut off voltage 2.5V
Working Charge Temp 0~50°C
Working Discharge Temp –20°C~50°C
Storage Temperature –20°C~50°C
 
Applications
e-bikes, powerwalls, car audio, golf
carts, forklifts, UPS, solar system, etc.
 
Cycle life
2000 cycles to 80% with 100% DOD
under normal temperature
 
Advantages
safety, environment-friendly, high
discharge current, low capacity loss,
super-long cycle life.


Share this Product