Don't get ripped off, get hooked up! Email sales@batteryhookup.com for any questions. Use code DIY for 5% off your order!
Don't get ripped off, get hooked up! Email sales@batteryhookup.com for any questions. Use code DIY for 5% off your order!
Cart 0
12V A123 MODULE 4S8P 32X ANR26650M1B - SHELF A3
12V A123 MODULE 4S8P 32X ANR26650M1B - SHELF A3
Battery Hookup

12V A123 MODULE 4S8P 32X ANR26650M1B - SHELF A3

Regular price $40.00 $0.00 Unit price per

Here are 12v A123 modules that are tested and balanced. The cells are in 4s8p configuration. The PCB/BMS on board is likely proprietary so I would not waste time trying to reuse it. Just add your own bms or salvage the pack or cells. At just $1.25 per cell you can't go wrong. These modules were only in service for a few months so they have a lot of life left in them. The M1B cells are the newer A123 cells and the best cylindrical cells for Lifepo4 on the market. 

ANR26650M1-B Specifications
 Nominal Ratings
  Voltage: 3.3 Volts
  Capacity: 2.5 Ah
  Energy: 8.25 Wh
  Specific Power: 2600 W/kg
  Impedance (1KHz AC Typical) 6 mΩ
  Cycle Life at 1C/1C, 100% DOD: > 4000 cycles
  Cell Type: 26650 Lithium Ion Power Cylindrical Cell

 Discharging
  Max Continuous Discharage: 50 A
  Max Pulse Discharge Current >50% SOC (10s): 120 A
  Minimum Voltage: 2 Volts
  Temperature: -30ºC to 55ºC

 Charging
  Recommended Standard Charge: 2.5 Amps
  Max Charge Rate: 10 Amps
  Max Pulse Charge Current <50% SOC (10s): 25 A
  Float Voltage: 3.45 Volts
  Recommended charge V & Cut-off Current: 3.6 Volts, taper to 125mA
  Temperature
    (reduce charging current to 250mA when under 0ºC): 0ºC to 55ºC

 Mechanical
  Diameter: Ø25.96 +/- 0.5 mm
  Length: 65.15 +/- 0.5 mm
  Mass: 76 g

 Certifications
  Transportation: UN 3480 (UN38.3), CIQ
  Safety: UL 1642, IEC 62133


Share this Product