This could be the greatest value battery ever. Get them while they last, only a half pallet of these and last time just on our Ebay store these sold in 3 days.
Since these are above 300wh we can only ship to US lower 48, canada, and puerto rico.
This module has a circuit board and Anderson PP120 Power Pole connectors with 4 awg copper wire coming out. It is plug and play. The circuit board has a 175a fuse too. Check the 2nd photo. You can series 2 of these to make a perfect 36v battery. Each battery has 8 genuine Toshiba SCiB LTO cells that are rated for 20,000 cycles, a BMS, and connectors. The wiring is thick using 4 gauge wire. These cells have only been used for 2 years and are 100% tested. You will not receive any dead cells. Every connection has a screw so if you want to remove the circuit board you just need a screw driver. This battery is built to last. If you buy this battery it will likely end up in your will. That's how long these will last. 20,000+ cycles is not a misprint.
This battery uses Toshiba SCiB 20ah cells, 8 in series. Making a perfect 18v battery pack. The photo below shows the discharge curve of LTO cells.
LTO can be used even at -30 degrees Celcius.
Recommended max charge and discharge is 10c or 200a per cell.
Each pack is 10.25 x 6.5 x 4 inches. The wires stick out around 9".
If you want to configure these into different voltages you can easily cut the busbar connections with a dremmel wheel. Each series connection has an area raised higher where you can cut without worrying about hitting the cells.
Individual cell dimensions are 116mmx22mmx106mm. I'm sure you can take the cells out of the holder but I would recommend keeping the original busbars and spacing in tact. Its a professional connection that you can use. Just utilize the screw terminals to make your connections with wires and ring terminals. Makes this super easy, no soldering.